正修科技大學機械工程系機電工程碩博士班

:::
現在位置首頁 > 師資介紹 > 師資介紹
  • 回上一頁

洪宗彬

助理教授

  • 推到 : FacebookTwitterplurk
  • 洪宗彬
    Emailtphung@gcloud.csu.edu.tw
    連絡電話(07) 731-0606 #3331
    研究室位置13-0101-2
    個人網頁
    課表時間 查詢
    晤談時間

    專長及研究領域

    超音波加工、雷射加工、雷射輔助銑削複合加工、有限元素分析、振動模態分析、機械結構應力分析、流場分析

    學歷

  • 國立中山大學 機械與機電工程學系 博士 (2012)
  • 中國文化大學 材料科學與製造研究所 碩士 (2001)
  • 文化大學 機械工程系 大學 (1999)
  • 經歷

  • 正修科技大學 專任助理教授 (2018/02)
  • 正修科技大學 兼任助理教授 (2012/8 - 2018/01 )
  • 正修科技大學 兼任講師 (2003/08 - 2012/08)
  • 金屬工業研究中心 副工程師 (2011/05 -2018/01 )
  • 明安國際公司 高級工程師 (2011/02 - 2011/05)
  • 建準電機公司 正工程師 (2009/02 - 2011/01)
  • 日月光半導體 工程師 (2007/09 - 2008/10)
    • 指標期刊
    • 一般期刊或研討會或專書
    • 專利
    • 產官學推廣計畫
    學年度論文名稱作者論文類型期刊/會議名稱出版/發表日期下載
    107Study on Residual Stress in Quench Hardened Zone by Laser Spiral Scanning PathTsung-Pin Hung *, Chao-Ming Hsu, Jun-Qian RuanEITsung-Pin Hung *, Chao-Ming Hsu, Jun-Qian Ruan2019/04/30
    107Temperature Field Numerical Analysis Mode and Verification of Quenching Heat Treatment Using Carbon Steel in Rotating Laser ScanningTsung-Pin Hung *, Chao-Ming Hsu, Hsiu-An Tsai, Shuo-Ching Chen, Zong-Rong LiuSCIMaterials2019/02/02
    107Residual stress prediction in laser-assisted milling considering recrystallization effectsYixuan Feng & Tsung-Pin Hung & Yu-Ting Lu & Yu-Fu Lin & Fu-Chuan Hsu & Chiu-Feng Lin & Ying-Cheng Lu & Steven Y. LiangSCIThe International Journal of Advanced Manufacturing2019/01/03
    107Modeling of heat transfer mode of rotating laser temperature fieldTsung-Pin Hung, Chao-Ming Hsu*, Guan-Zhi Yang, and Ahder LinEIICICE20182018/11/09
    107Temperature Modeling of AISI 1045 Steel during Surface Hardening ProcessesTsung-Ping Hung, Hao-En Shi, and Jao-Hwa KuangSCIMaterials2018/09/25
    106Inverse analysis of the cutting force in laser-assisted milling on Inconel 718Yixuan Feng,Yu-Ting Lu,Yu-Fu Lin,Tsung-Pin Hung, Fu-Chuan Hsu, Chiu-Feng Lin, Ying-Cheng Lu, Steven Y. LiangSCIThe International Journal of Advanced Manufacturing Technology2018/01/24
    106Heat affected zone in the laser-assisted milling of Inconel 718Zhipeng Pan, Yixuan Feng, Tsung-Pin Hung, Yun-Chen Jiang, Fu-Chuan Hsu, Lung-TienWu, Chiu-Feng Lin, Ying-Cheng Lu, Steven Y. LiangSCIJournal of Manufacturing Processes2017/12/01
    106Force modeling of Inconel 718 laser-assisted end millingZhipeng Pan,Yixuan Feng, Yu-Ting Lu, Yu-Fu Lin, Tsung-Pin Hung, Fu-Chuan Hsu, Steven Y. LiangSCIThe International Journal of Advanced Manufacturing Technology2017/09/01
    106Fabrication of microfluidic structures in quartz via micro machining technologiesYing-Chieh Lin, Chung-Ching Lee, Heng-Sheng Lin, Zheng-Han Hong, Fu-Chuan Hsu, Tsung-Pin Hung, Yu-Ting LyuSCIMicrosystem Technologies2017/06/01
    106Analytical model for force prediction in laser-assisted milling of IN718Zhipeng Pan, Yu-Ting Lu, Yu-Fu Lin, Tsung-Pin Hung, Fu-Chuan Hsu, Steven Y. LiangSCIJournal of Advanced Manufacturing Technology2017/06/01
    102The Effect of Plaque and Artery Parameters on Stent Expansion during the Implantation ProcessHui-Lung Chien, Chao-Ming Hsu, Ah-Der Lin, Tsung-Pin Hung, Yung-Yu Chen, Jao-Hwa KuangSCILife Science2013/12/01
    102Using Nano Indentation Techniques to Investigate theYoung’s Moduli for Human Teeth of Different AgesChao-Ming Hsu, Ah-Der Lin, Hui-Lung Chien, Tsung-Pin Hung, and Jao-Hwa Kuang,SCIJournal of Bionanoscience2013/04/04
    102Using Nano Indentation Techniques to Investigate the Young's Moduli for Human Teeth of Different AgesChao-Ming Hsu, Ah-Der Lin, Hui-Lung Chien, Tsung-Pin Hung, Jao-Hwa Kuang,SCIJournal of Bionanoscience2013/04/02
    102Residual Stress and Bead Profile Analysis of Pulsed Nd:YAG Laser Lap WeldingTsung-Pin Hung, Chao-Ming Hsu, Ah-Der Lin, and Jao-Hwa KuangEIApplied Mechanics and materials2013/01/02
    101Enhancement of Coupling Efficiency of Butterfly Package Laser Modules Based on Post-Weld-Shift CompensationJao-Hwa Kuang, Tsung-Pin Hung, Shian-Huan Chiou, Chao-Ming Hsu,EIApplied Mechanics and Materials2012/10/02
    101Stainless Steel Surface Etching Morphologies Using Electro Plasma TechnologyAh-Der Lin, Chao-Ming Hsu, Chich-Kuan Chen, Da-Yun Huang, Tsung-Pin Hung, Jao-Hwa Kuang,SCIAdvanced Science Letters2012/07/03
    101The Effect of Plaque and Artery Parameters on Stent Expansion during the Implantation ProcessChao-Ming Hsu, Ah-Der Lin, Hui-Lung Chien, Tsung-Pin Hung, Yung-Yu Chen, and Jao-Hwa KuangSCIJournal of Biobased Materials and Bioenergy2012/06/14
    101Investigation of Young’s Moduli for Human teeth of Different Ages by Nano Indentation TechnologyChao-Ming Hsu, Ah-Der Lin, Hui-Lung Chien, Tsung-Pin Hung, and Jao-Hwa KuangSCIJournal of Biobased Materials and Bioenergy2012/02/17
    101A Keyhole Volumetric Model for Weld Pool Analysis in Nd:YAG Pulsed Laser WeldingJao-Hwa Kuang, Tsung-Pin Hung, Chih-Kuan ChenSCIOptics & Laser Technology2012/02/01
    101Analysis of coupling power of 980 nm pump laser diode in butterfly packaging with 80Au20Sn, 0.5Cu4AgSn and 37Pb63Sn solder under thermal cycling and high-temperature agingJao-Hwa Kuang, Tsung-Pin Hung, Chao-Ming Hsu, Ah-Der LinSCIIEEE TRANSACTIONS on Electronics Packaging Manufacturing
    101The Surface Absorption Coefficient of S304L Stainless Steel by Nd:YAG Micro-Pulse LaserJao-Hwa Kuang, Tsung-Pin Hung, Kuen Lai, Chao-Ming Hsu, Ah-Der Lin,SCIAdvanced Materials Research
    101An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball JointsJao-Hwa Kuang, Tsung-Pin Hung, Chao-Ming Hsu, Ah-Der Lin and Wen-Chun Chiu,EIAdvanced Materials Research
    學年度論文名稱作者類型期刊/研討會名稱出版/發表日期下載
    108Study on Residual Stress in Quench Hardened Zone by Laser Spiral Scanning PathTsung-Pin Hung *, Chao-Ming Hsu, Jun-Qian Ruan研討會IEEE ICIASE 20192019/04/27
    107A Finite Element Analysis Mode of Medium Carbon Steel During Laser Hardening ProcessTsung-Pin Hung, Hao-En Shi, Jao-Hwa Kuang研討會IMETI2018
    107Modeling of heat transfer mode of rotating laser temperature fieldTsung-Pin Hung, Chao-Ming Hsu*, Guan-Zhi Yang, and Ahder Lin研討會ICICE2018
    107The Cutting Force Simulation in Laser Assisted Milling of Inconel 718Tsung-Pin Hung, Yu-Ting Lu, Zhipeng Pan, Yixuan Feng, and Steven Y. Liang研討會WCMNM2018
    105Post-treatment process of additive manufacturing for intramedullary nails by ultrasonic vibration machining, abrasive flow machining, and electropolishing technologyFu-Chuan Hsu, Tsung-Pin Hung, Yunn-Shiuan Liao, Shih-Ming Wang, Ming-Chyuan Lu, Ying-Cheng Lu, Ho-Chung Fu,研討會4M/IWMF 2016
    104The additive manufacturing bone nail post treatment process using ultrasonic vibration assisted and abrasive flow machining technologyYing-Cheng Lu, Fu-Chuan Hsu, Tsung-Pin Hung, Wen-Chieh Wu, and Hsiang-Pin Wang研討會MIRAI 2015
    103Microfluidic channel on brittle material by micro machining technologiesJack Y.C. Lin , Zheng-Han Hong, Tsung-Pin Hung, Ming-Yuan Chen, Fu-Chuan Hsu, Yan- Ting Chen, Tsai-Fa Chen研討會Nanoman 2014
    103The Development of Ultrasonic Vibration Assisted Drilling Technic in Chemical Tempered GlassTsung-Pin Hung, Jack X. J. Lee , Roger X. C. Wang, Zei-Fa Chen, Ming-Yuan Chen, Xiang-Bin Wang, Kun-Min Huang, Yu-Ting Lyu,研討會ICOMM 2014
    101The Surface Absorption Coefficient of S304L Stainless Steel by Nd:YAG Micro-Pulse LaserJao-Hwa Kuang, Tsung-Pin Hung, Kuen Lai, Chao-Ming Hsu, and Ah-Der Lin研討會The International Conference on Manufacturing Science and Engineering
    學年度專利/新品種名稱申請人/權利人申請/公告日期證書字號下載
    106硬脆材料之殘留應力檢測方法許富銓; 洪宗彬 ; 王祥賓; 呂英誠; 伏和中 / 財團法人金屬工業研究發展中心2017/05/01I580939
    105加工設備之校正評估方法許富銓; 林彧甫; 洪宗彬;呂育廷; 洪正翰 / 財團法人金屬工業研究發展中心2016/07/01I540016
    105多頻振動刀把裝置賴佳欣; 洪宗彬 / 丸榮機械股份有限公司2016/02/01I519381
    104振動加工裝置及其振動驅動模組胡博期; 洪宗彬; 簡國諭; 莊殷; 蔡宗立 / 財團法人金屬工業研究發展中心2015/04/11I480111
    102旋轉振動加工刀把賴佳欣 ; 洪宗彬; 陳明源 / 丸榮機械股份有限公司2013/06/21M455583
    101振動加工裝置洪宗彬; 林世楨; 林惠萍; 呂育廷 / 財團法人金屬工業研究發展中心2012/10/01M438370
    學年度專案案號專案案名(計劃名稱)執行起迄工作類別計劃總金額主要經費來源下載
    107107WFDC610110射頻器導波管之切削成形特性之分析2018/05/01~2019/04/30主持人國科會
    107正研產學字(107)第090號超音波深孔鑽削技術移轉2018/11/01~2019/04/30主持人企業(公營及私人企業)